The Petroleum (Consolidation) Regulations 2014 contain the basic design safety features of petrol containers. Petrol containers that are, or have been, manufactured to this standard can continue to be sold for use in GB until 1 October 2016.
Also, from 1 October 2014 petrol can be stored in larger plastic or metal containers.
Are there any specific requirements for manufacturing petrol containers?
The general principles for portable petrol storage containers are set out in the Petroleum (Consolidation) Regulations 2014. They must be designed and manufactured as follows:
- have a nominal capacity
- no greater than 10 litres if made of plastic
- no greater than 20 litres if made of metal
- have a total capacity between 10% and 15% more than the nominal capacity
- be made of either metal or plastic that is suitable and safe for the purpose and will not significantly degrade due to exposure to petrol or naturally occurring ultra-violet radiation
- be designed and constructed so that:
- it is reasonably robust and not liable to break under the normal conditions of use
- the escape of liquid or vapour is prevented
- petrol can be poured safely from it
- it is not unsteady when placed on a flat surface
- be marked or labelled in a legible and indelible form with:
- the words ‘PETROL’ and ‘HIGHLY FLAMMABLE
- an appropriate hazard warning sign
- the nominal capacity in litres
- the manufacturer’s name and the date and month of manufacture
The following pdf document contains guidance from the Health & Safety Executive (HSE) on the design and manufacturing of portable petrol storage containers.
The content on this page contains public sector information licensed under the Open Government Licence v3.0.
Please note that any images forming part of this advice article are for illustrative purposes only and may not be indicative of colours, labelling or markings relating to any country specific legislation, guidelines or standards. Written information and guidance relate to the United Kingdom and specifically to information provided by the Health and Safety Executive (HSE) and other UK public sector bodies.
Information herein is primarily provided for the purposes of managing fire risk. However, in order to give the reader a more complete understanding of the storage and handling of toxic and flammable substances in drums and cylinders, we have provided additional information. If you need specific advice or information on matters not directly related to fire risk management, you should consult an expert with the appropriate knowledge and/or the supplier or manufacturer.
Disclaimer: INFORMATION PROVIDED ON THIS WEBSITE IS NOT INTENDED TO BE TREATED AS PROFESSIONAL ADVICE AND SHOULD NOT UNDER ANY CIRCUMSTANCES BE USED AS A SUBSTITUTE FOR PROFESSIONAL ADVICE. ALWAYS CONSULT A FIRE PROFESSIONAL, OR OTHER RELEVANT PROFESSIONAL, FOR ADVICE ON YOUR PARTICULAR CIRCUMSTANCES AND REQUIREMENTS.
Blackwood Fire began trading in 1983. We have an absolute belief in quality - it is the cornerstone of our company's culture. Our primary aim is to help you protect the lives and livelihoods of people and your organisation or business by ensuring that we only provide quality products that fully meet industry standards - also, by providing continuous training to our staff via recognised trade bodies, associations and the British Standards Institute (BSI). We strongly believe that promoting quality practices and dealing with everyone in a fair and honest manner adds value to organisations and businesses. Read more on our 
