Gas, non-water based, fire suppression systems for server rooms, data centres, computer rooms, medical equipment and other sensitive areas

Fike fire protection systems are effective, easy to use, and safe for people, key assets, facilities and the environment. If you are looking for a fire suppression system in industrial, commercial or special hazard applications, Fike fire suppression systems can provide the solution.

The Fike Clean Agent Fire Protection System is an ideal choice for speed in suppressing fires, reducing damages, saving on floor space and allowing visibility.

Fast, Effective Clean Agent Fire Protection

The Fike Clean Agent Fire Protection System is an ideal choice for speed in suppressing fires, reducing damages, saving on floor space and allowing visibility. It leaves no residue and doesn’t require costly clean-up, unlike sprinklers and other fire protection systems. It also discharges in 10 seconds or less, extinguishing a fire quickly and effectively.

Fike Fire Suppression Systems Diagrams

Fike’s Clean Agent System uses Fike’s patented rupture disc valve design offering additional flexibility, effectiveness and speed resulting in minimal equipment and facility damage, and little or no business interruption.

Fike’s Clean Agent Fire Suppression Systems can be used in applications ranging from telecommunications and data processing to switch gear rooms, military applications and cell sites to high-tech medical applications.

Fike Fire Fuppression Systems

HFC-227ea fire suppression is also a widely accepted replacement for Halon 1301.

With a Fike designed fire protection system you can count on speed and efficiency in your fire protection, and much more.

Some of the many advantages of this fire suppression system include:

  • Requires minimal container storage spaceFike Fire Suppression Systems
  • Zero ozone depleting potential
  • Low global warming potential
  • Short atmospheric lifetime
  • Safe for occupied areas
  • Full line of listings and approvals
  • Best warranty in the fire protection industry
  • Extensive line of fire protection accessories
  • Simplified installation
  • ISO 9001 certified

In addition, system components and accessories are available to meet your complete clean agent fire suppression system requirements.

Intelligent control panels, delayed action devices, early warning smoke detection, warning signs, manual releasing devices, automatic detection and warning devices and fire alarm panels are all available.

For full details of the Fike FM-200® Fire Suppression System, download the pdf here

ECARO-25® Clean Agent Fire Suppression

Superior, Cost-Effective Clean Agent Fire Protection

Water-based fire suppression systems (sprinklers) are designed to protect people and structures but when it comes to protecting high value machinery, computers and other electronic equipment, water can be more damaging than the fire itself. An ECARO-25® clean agent fire suppression system is the superior, cost-effective choice for protecting electronics and high-value assets – reducing the threat of needless downtime and business interruption.

ECARO-25 PROVIDES OPTIMUM FIRE AND DAMAGE PROTECTION FOR THE FOLLOWING CRITICAL ASSETS:

Industrial/Manufacturing

  • Chemical laboratories
  • Clean rooms
  • Compressor / pumping stations
  • Control rooms
  • Flammable liquid storage
  • Hazardous manufacturing
  • Oil collection stations
  • Paint mixing rooms
  • Printing plants
  • Robotic equipment
  • Textile manufacturing

Professional Services Firms

  • Computer rooms
  • Electric utility facilities
  • Media storage
  • Power supply facilities
  • Switchgears
  • Transformer vaults

Mission Critical Facilities

  • IT systems / software
  • Telecommunication centres
  • IT modular facilities

Transportation

  • Airport field lighting controls
  • Flight simulators
  • Military vehicles
  • Traffic control

Healthcare Industry

  • Clinical equipment
  • Operating rooms
  • Testing / imaging equipment

Irreplaceables

  • Art / artifacts / historical collections
  • Records and data archives
  • Reference material

IMPULSE VALVE TECHNOLOGYFike Fire Suppression Systems - Impulse Valve Technology

Reliability and efficiency of a rupture disc with the flexibility of electric actuation

Known for quality, dependable fire protection systems, Fike continues to look for ways to improve the effectiveness of all its safety products. The Impulse Valve Technology greatly improves the performance of clean agent fire suppression systems over mechanical valve systems by combining the reliability and efficiency of a rupture disc with the flexibility of electric actuation.

ECARO-25 SUPERIOR CLEAN AGENT FIRE SUPPRESSION

ECARO-25 is the best way to suppress fires and protect your high-value assets and business continuity.

Fike Fire Suppression System - ECARO-25All clean agents must remain in the protected space for a specified period of time in order to extinguish a fire. Thanks to the unique physical properties of the ECARO-25 agent, the hold time in a 5000 cubic foot enclosure is 27 minutes, compared to a 12 minute hold time for an HFC-227ea system and a 10 minute hold time for a FK-5-1-12 system.

Fike Fire Suppression System - ECARO-25

ECARO-25 offers a far superior hold time, allowing more time for trained personnel response and minimal chance for any fire re-ignition.

USES LESS CLEAN AGENT

In addition, ECARO-25 requires 10% less agent per cubic foot/metre than HFC-227ea systems and 37% less clean agent per cubic foot/metre than FK-5-1-12. The superior properties of the system allow you to utilize small diameter piping over long distances, making it easier and less expensive to design your clean agent pipe network. With ECARO-25, you spend less money on the agent, piping and installation, making it a very cost-effective clean agent fire suppression system.

Fike Fire Suppression System - ECARO-25 uses less clean agent

For full details of the Fike ECARO-25® Clean Agent Fire Suppression, download the pdf here

PROINERT2 Inert Gas Fire Protection System

Cost-Effective Inert Gas Fire Protection

Inert gas fire suppression systems are the safe, natural way to extinguish a fire. Because of its unique patented valve assembly, Fike’s PROINERT agent enters the protected room within, the industry required, 60 seconds but at a steady flow rate, preventing destructive turbulence from occurring. This constant flow rate allows for the use of small-diameter, low pressure (and less expensive) piping from the inert gas container all the way to the nozzle and, the necessary venting area is much smaller — reducing installation costs by as much as 60% on venting hardware.

Most inert gas systems discharge from the containers at high pressure, using pressure reducers further down the pipe network and requiring the use of expensive, high-pressure piping through much of the system.

Fike Fire Suppression Systems - Constant flow rate Fike Fire Suppression Systems - Lower pressure

Fike Fire Suppression System - Flow Rate vs. TimePROINERT2 is different. The superior cylinder valve automatically reduces the pressure of the extinguishant at discharge. It provides an ideal discharge pressure and maintains a constant flow rate throughout the system. With PROINERT2, you can use small-diameter, low-pressure piping from the container to the nozzle – lowering your system costs.

For full details of the Fike PROINERT2 Inert Gas Fire Protection System, download the pdf here

TWINFLEX SRP Extinguishing Control Panel

Innovative, safe and cost-effective extinguishing release control

The TWINFLEX SRP is a Single hazard Releasing Panel that is suitable for use in any market that requires an EN 54 approved control panel. The unit is housed in an elegant enclosure with an intuitive user interface with an LCD text display.

TWINFLEX SRP can be used as a standalone solution, or can be interfaced to external fire safety systems through its versatile set of monitored inputs.

Fike Fire Suppression System - TWINFLEX SRP

Configuration

The TWINFLEX SRP offers unrivalled performance and a unique set of features that include three configuration options for the zonal inputs. Each of the 4 input zones can be configured as:

  • TWINFLEX – Allows the use of Fike’s TWINFLEX intelligent 2-wire devices, resulting in the ability to connect Multi-Function Detectors, Manual Releases, Sounders and Beacons on the same 2-wire circuit – also provides more detailed device and fault type information
  • Conventional – Allows for the connection of standard conventional detectors, or;
  • Releasing – Defines the circuit to be used with Releasing Modules.

Remote Status Indicator (RSI)

Fike Fire Suppression System - Remote Status Indicator (RSI)The RSI is an active Remote Status Indicator that allows for the system status and control to be provided at secondary locations.

Features of the Twinflex SRP Extinguishing Control Panel

  • Combined LED Indicators and LCD Text Display
  • 4 Programmable Zone Inputs
  • 5 Programmable Monitored Inputs
  • 3 Programmable Sounder / Beacon Circuits
  • 5 Relay Outputs (4 Programmable)
  • 2 Resettable 24Vdc Auxiliary Outputs
  • Programmable Discharge Timer
  • Event Log
  • RS485 Connection to up to 8 Remote Status Indicator panels
  • Direct USB Connection for programming via a PC
  • Up to 12 AH Battery Capacity

Applications:

TWINFLEX SRP has functions that make it an ideal solution for the following applications:

  • Inert and Clean Agent
  • Carbon Dioxide
  • Pre-Action
  • Sprinkler/Deluge
  • Water-mist
  • Aerosol Extinguishing Systems

For full details of the Fike Twinflex SRP Extinguishing Panel, download the pdf here

 Google logo   

 Read our Google Reviews

STAY UP TO DATE!
Receive news, advice &
services information direct to your inbox

We will never share your details with third parties!
View our Privacy Policy

The FIA logo FPA logo CHAS - The Contractors Health and Safety Scheme  Safe Contractor Logo   BAFE logo  BSI Certified Logo  IFEDA  Constructionline

Go to top
Request a free quote

Request a FREE quote using any of the options below. 

Telephone 01495 220399

Email This email address is being protected from spambots. You need JavaScript enabled to view it.